Tile adhesive bags

MEASURE FIRST

How to prepare your inputs

Measure each surface, choose the exact product and read its pack coverage or consumption rate. Confirm cuts, joints, depth and thickness.

How this calculation works

Product mass = area × total consumption × (1 + allowance). Packs round up.

Assumptions & exclusions

Enter total consumption covering all required coats or thickness, not a single-coat rate. Product example values are illustrative. Does not choose adhesive, waterproofing systems, thickness or compliance. Use the exact datasheet and substrate requirements.

Your next step

Check substrate preparation, adhesive compatibility, expansion joints, curing and supplier quantities with your tiler.

Further reading

• ARDEX coverage calculators

These resources provide background information. Confirm current product specifications and project requirements with your supplier or trade professional.

What if my shape or product is different?

Use dimensions and product data that match the stated method. For complex work, calculate separate sections or obtain a project-specific take-off. Do not apply simple geometry to structural or compliance decisions.

Why are quantities rounded up?

Whole bags, packs, sheets or cartridges round up to purchasable units. Decimal area or volume results are planning figures; confirm order increments with the supplier.

Are my entries saved?

No. Entries remain in the current browser page and clear on reload. Printing can save your results and inputs as a PDF on your device.